service unsupported-transceiver
Use this command to allow an unsupported transceiver to be enabled for DDM monitoring.
Use the no form of this command to disable DDM on an unsupported transceiver.
Command Syntax
service unsupported-transceiver
no service unsupported-transceiver
Parameters
None
Default
By default, DDM on an unsupported transceiver is disabled.
Command Mode
Configuration mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#service unsupported-transceiver
(config)#no service unsupported-transceiver
Last modified date: 08/28/2023