ipv6 dhcp prefix-delegation
Use this command to enable the DHCPv6 client to request the prefix (IA_PD) for the interface.
Prefixes delegated by the DHCP server are stored in the general prefix called PREFIX-NAME.
Use the no form of command to remove the IA_PD option from the DHCPv6 client request. This command also deletes the learned prefix if it exists.
Command Syntax
ipv6 dhcp prefix-delegation PREFIX-NAME
no ipv6 dhcp prefix-delegation
Parameters
PREFIX-NAME
Name of the learned prefix (maximum length 255 characters).
Default
DHCPv6 Prefix delegation client is not enabled by default.
Command Mode
Interface mode
Applicability
This command was introduced in OcNOS version 4.2.
Examples
#configure terminal
(config)#interface xe1
(config-if)#ipv6 dhcp prefix-delegation prefix_xe1
(config-if)#
Last modified date: 08/28/2023