OcNOS-SP : System Management Guide : System Management Command Reference : FMS Command Reference : show alarm active
show alarm active
Use this command to display the current active alarms in the database.
Command Syntax
show alarm active
Parameters
None
Command Mode
Exec and Privileged Exec mode
Applicability
This command was introduced in OcNOS version 3.0 and the output changed in OcNOS version 6.1.0.
Example
#show alarm active
Active Alarms received:-
Active-Alarms-Count: 1
Alarm-Date-Time Severity Alarm-ID Alarm-Description
------------------------------------------------------------------------------
2019-02-15T19:57:14.525Z MAJOR IFMGR_IF_DOWN::xe8 OcNOS [IFMGR_IF_DOWN] Interface xe8 changed state to down
#
Last modified date: 08/28/2023