prbs
Use these commands to configure the PRBS pattern generator/checker type to be used for diagnostics of the QSFP-DD module host/media side and to configure the PRBS pattern generator/checker location (pre-fec/post-fec) on the QSFP-DD module host/media side. If the generator/checker pattern type and location are supported by the QSFP-DD module this will enable the selected function.
Use the no parameter to remove this configuration and disable the generator/checker function.
Command Syntax
prbs (generator|checker) type (31q|31|23q|23|15q|15|13q|13|9q|9|7q|7|ssprq) (host|media)
prbs (generator|checker) (pre-fec|post-fec) (host|media)
no prbs (generator|checker) type (host|media)
no prbs (generator|checker) (host|media)
Parameters
generator
Configure the pattern generator
checker
Configure the pattern checker
31q
Configure PRBS-31Q type
31
Configure PRBS-31 type
23q
Configure PRBS-23Q type
23
Configure PRBS-23 type
15q
Configure PRBS-15Q type
15
Configure PRBS-15 type
13q
Configure PRBS-13Q type
13
Configure PRBS-13 type
9q
Configure PRBS-9Q type
9
Configure PRBS-9 type
7q
Configure PRBS-7q type
7
Configure PRBS-7 type
ssprq
Configure SSPRQ type
pre-fec
Configure to generate before the FEC encoder / check before the FEC decoder
post-fec
Configure to generate after the FEC encoder / check after the FEC decoder
host
Configure host side
media
Configure media side
Command Mode
QSFP-DD mode
Applicability
This command was introduced before OcNOS version 6.1.0.
Example
#configure terminal
(config)#qsfp-dd 0
(config-qsfp-dd)#prbs generator type 15 host
(config-qsfp-dd)#prbs checker type 23q host
(config-qsfp-dd)#prbs generator type 7q media
(config-qsfp-dd)#prbs checker type ssprq media
(config-qsfp-dd)#commit
(config-qsfp-dd)#no prbs generator type host
(config-qsfp-dd)#no prbs checker type media
(config-qsfp-dd)#commit
(config-qsfp-dd)#
Last modified date: 08/28/2023