show qsfp-dd advertisement monitors host
Use this command to show QSFP-DD module advertised host side monitors.
Command Syntax
show qsfp-dd PORTNUM advertisement monitors host
Parameters
PORTNUM
QSFP-DD front panel port number
Command Mode
Exec mode and Privileged Exec mode
Applicability
This command was introduced before OcNOS version 6.1.0.
Example
show qsfp-dd 0 advertisement monitors host
Port Number : 0
Pre-FEC BER Minimum Input : Yes [Lane 1, Lane 3, Lane 5, Lane 7]
Pre-FEC BER Maximum Input : Yes [Lane 1, Lane 3, Lane 5, Lane 7]
Pre-FEC BER Average Input : Yes [Lane 1, Lane 3, Lane 5, Lane 7]
Pre-FEC BER Current Value Input : Yes [Lane 1, Lane 3, Lane 5, Lane 7]
FERC Minimum Input : Yes [Lane 1, Lane 3, Lane 5, Lane 7]
FERC Maximum Input : Yes [Lane 1, Lane 3, Lane 5, Lane 7]
FERC Average Input : Yes [Lane 1, Lane 3, Lane 5, Lane 7]
FERC Current Value Input : Yes [Lane 1, Lane 3, Lane 5, Lane 7]
| Link Performance |
Tx FDD : Yes
Tx FED : Yes
Last modified date: 08/28/2023