show qsfp-dd laser status
Use this command to show QSFP-DD module current laser configuration status and alarm flags.
Command Syntax
show qsfp-dd PORTNUM laser status
Parameters
PORTNUM
QSFP-DD front panel port number
Default
None.
Command Mode
Exec mode and Privileged Exec mode.
Applicability
This command was introduced in OcNOS version 6.2.0.
Examples
show qsfp-dd 0 laser status
Port Number : 0
--------------------------------------------------
Attribute | Lane | Value | Unit |
--------------------------------------------------
Grid Spacing | 1 | 100.000 | GHz |
Laser Frequency | 1 | 191.900000 | THz |
Channel Number | 1 | -12 | -- |
Wavelength | 1 | 1562.23 | nm |
-------------------------------------
Flag | Lane | Status |
-------------------------------------
Tuning in progress | 1 | No |
Wavelength locked | 1 | Yes |
-----------------------------------------------
Flag | Lane | Status (L) |
-----------------------------------------------
Target output power OOR | 1 | No |
Fine tuning out of range | 1 | No |
Tuning accepted | 1 | Yes |
Channel number valid | 1 | Yes |
Last modified date: 08/28/2023