show qsfp-dd monitors module
Use this command to show QSFP-DD module monitors information.
Command Syntax
show qsfp-dd PORTNUM monitors module
Parameters
PORTNUM
QSFP-DD front panel port number
Command Mode
Exec mode and Privileged Exec mode
Applicability
This command was introduced before OcNOS version 6.1.0.
Example
show qsfp-dd 0 monitors module
Codes: [HA : High Alarm], [LA : Low Alarm], [HW : High Warning], [LW : Low Warning]
Port Number : 0
----------------------------------------------------------------------------------------------------------------
Attribute | Value | High Alarm | High Warning | Low Warning | Low Alarm | Units
----------------------------------------------------------------------------------------------------------------
Voltage | 3.24 | 3.46 | 3.43 | 3.17 | 3.13 | Volt
Temperature | 42.0 | 80.0 | 75.0 | 15.0 | -5.0 | Celsius
TEC Current Magnitude | 63.000 | 100.00 | 100.00 | -100.00 | -100.00 | %
Laser Temperature | 43.000 | 80.00 | 75.00 | -40.00 | -80.00 | Celsius
Last modified date: 08/28/2023