radius-server login host
Use this command to configure a RADIUS server for both accounting and authentication.
Use the no form of this command to remove a RADIUS server.
Command Syntax
radius-server login host (A.B.C.D | X:X::X:X | HOSTNAME) (vrf management|) seq-num (<1-8>)
radius-server login host (A.B.C.D | X:X::X:X | HOSTNAME) (vrf management|) seq-num (<1-8>) timeout <1-60>
radius-server login host (A.B.C.D | X:X::X:X | HOSTNAME) (vrf management|) seq-num (<1-8>)(acct-port <0-65535> |) | timeout <1-60> |)
radius-server login host (A.B.C.D | X:X::X:X | HOSTNAME) (vrf management|) seq-num (<1-8>)(|(auth-port <0-65535> (|(acct-port <0-65535> (|(timeout <1-60>))))))
radius-server login host (A.B.C.D | X:X::X:X | HOSTNAME) (vrf management|) seq-num (<1-8>)(|(key ((0 WORD) | (7 WORD)) (|(auth-port <0-65535> (|(acctport <0-65535> (|(timeout <1-60>))))))))
no radius-server login host (A.B.C.D | X:X::X:X | HOSTNAME) (vrf management|) (seq-num (<1-8>)|)
no radius-server login host (A.B.C.D | X:X::X:X | HOSTNAME) (vrf management|) (seq-num (<1-8>)|) timeout
Parameters
login
Remote login
A.B.C.D
IPv4 address of RADIUS server
X:X::X:X
IPv6 address of RADIUS server
HOSTNAME
DNS host name of RADIUS server
seq-num
seq-num Sequence Number / Priority index for radius-servers
<1-8>
sequence number for servers
timeout
How long to wait for a response from the RADIUS server before declaring a timeout failure
<1-60>
Range of time out period in seconds
vrf
Virtual Routing and Forwarding
management
Management VRF
Default
No default value is specified
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#radius-server login host 203.0.113.15 vrf management seq-num 1
Last modified date: 08/28/2023