show controller details
Use this command to display the EEPROM details of transceiver.s
Command Syntax
show interface (IFNAME|) controllers (remote)
Parameters
IFNAME
Interface name. If not specified, this command displays details of all connected transceivers.
remote
Interface name.
Default
None
Command Mode
Exec mode
Applicability
This command was introduced before OcNOS version 6.2.0
Example
Below command displays details of 400G connected transceivers.
OcNOS#sh qsfp-dd 0 eeprom
Port Number : 0
Identifier : QSFP-DD Double Density 8X Pluggable Transceiver
Name : E.C.I. NETWORKS
OUI : 0xda 0x28 0xec
Part No : EN-QDD-SR8
Revision Level : 10
Serial_Number : 7000007300001
Manufacturing Date : 220406 (yymmddvv, v=vendor specific)
CLEI Code :
Module Power Class : 6
Module Max Power : 11.00 Watt
Cooling Implemented : No
Module Temperature Max : 70 Celsius
Module Temperature Min : 0 Celsius
Operating Voltage Min : 3.14 Volt
Optical Detector : PIN
Rx Power Measurement : Average Power
Tx Disable Module Wide : No
Cable Assembly Link Length : Separable Media
Connector Type : MPO 1x16
Media Interface Technology : 850nm VCSEL
CMIS Revision : 4.0
Memory Model : Paged
MCI Max Speed : 400 kHz
Active Firmware Revision : 0.0
Inactive Firmware Revision : 1.0
Hardware Revision : 1.0
Media Type : Optical MMF
Max MMF(OM2) Link Length : 0 Meter
Max MMF(OM3) Link Length : 70 Meter
Max MMF(OM4) Link Length : 100 Meter
Max MMF(OM5) Link Length : 100 Meter
Wavelength Nominal : 850.00 nm
Wavelength Tolerance : 15.00 nm
OcNOS#
Last modified date: 08/28/2023