OcNOS-SP : Layer 3 Guide : Two-Way Active Measurement Protocol Command Reference : TWAMP Commands : twamp stop-test-session (Deprecated)
twamp stop-test-session (Deprecated)
This command is not supported anymore. The “delay-measurement dynamic twamp” command under interface mode should be used to start/stop twamp measurement instead.
Use this command to stop the TWAMP test session.
Command Syntax
twamp stop test-session WORD
Parameters
WORD
TWAMP test session name.
Default
NA
Command Mode
Privileged Exec mode
Applicability
This command was introduced before OcNOS version 3.0.
Examples
#twamp stop test-session s1
 
 
 
Last modified date: 08/28/2023