router vrrp
Use this command to enable a VRRP routing process.
Use the no form of this command to disable a VRRP routing process.
Command Syntax
router vrrp <1-255> IFNAME
no router vrrp <1-255> IFNAME
Parameters
<1-255>
Virtual router identifier
IFNAME
Interface name
Default
No default value is specified
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#router vrrp 1 eth0
Last modified date: 08/28/2023