OcNOS-SP : Layer 3 Guide : Virtual Router Redundancy Protocol Command Reference : VRRP Commands : show vrrp (global | ipv4) statistics
show vrrp (global | ipv4) statistics
Use this command to display VRRP global or ipv4 router statistics.
Command Syntax
show vrrp (global | ipv4 ) statistics
Parameters
global
Global (VRRP Router)
ipv4
VRRP IPv4 router
Command Mode
Exec mode and Privileged Exec mode
Applicability
This command was introduced before OcNOS version 1.3.8.
Example
#show vrrp global statistics
VRRP Global Statistics
Checksum Errors : 0
Version Errors : 0
VRid Errors : 0
Discontinuity Time: 00 hour, 00 min, 00 sec
 
 
#show vrrp ipv4 statistics
Address family IPv4
VRRP Id: 1 on interface: xe1
Master Transitions: 0
Advertisements Rcvd: 0
Pkts Rcvd with IP TTL Errors: 0
Pkts Rcvd with Zero Priority: 0
Pkts Sent with Zero Priority: 0
Pkts Rcvd with Invalid TYPE: 0
Pkts Rcvd with Packet Length Errors: 0
Pkts Rcvd with IP Count Mismatch: 0
Discontinuity Time: 00 hour, 00 min, 00 sec
Refresh Rate: 1000 ms
 
Last modified date: 08/28/2023