vrrp compatible-v2
Use this command to enable the backward-compatibility feature. When enabled, both VRRPv3 and VRRPv2 inter-operation are supported.
Command Syntax
vrrp compatible-v2 (enable| disable)
Parameters
enable
Enable VRRPv2 inter-operation
disable
Disable VRRPv2 inter-operation
Default
By default, vrrp compatible-v2 is enabled
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#vrrp compatible-v2 enable
Last modified date: 08/28/2023