cos queue
Use this command to configure user defined mapping for cos and queue.
Use the no form of this command to remove the mapping.
Command Syntax
cos <0-7> queue <0-7>
no cos <0-7>
Parameters
<0-7>
COS and Queue ranger
Default
Default cos and queue value is one-one default mapping if it is not configured.
Command Mode
QoS config mode
Applicability
This command was introduced in OcNOS version 3.0.
Example
(config)#qos profile cos-to-queue ac_port_ingress
(config-ingress-cos-map)#cos 1 queue 7
(config-ingress-cos-map)#no cos 1
Last modified date: 08/29/2023