l3 dscp dscpEncap
Use this command to configure or update user defined mapping for dscp to dscp for egress L3 Traffic over VXLAN tunnel.
Use the no form of this command to delete the mapping.
Command Syntax
l3 dscp <0-63> dscpEncap <0-63>
no l3 dscp <0-63>
Parameters
<0-63>
DSCP values
Default
Default dscp and dscp encap value is one-one default mapping if it is not configured.
Command Mode
egress-dscp-encap-map mode
Applicability
This command was introduced in OcNOS version 4.2.
Example
#configure terminal
(config)#qos profile dscp-encap DSCP_ENCP
(config-egress-dscp-encap-map)#l3 dscp 10 dscpEncap 48
(config-egress-dscp-encap-map)#no l3 dscp 10
Last modified date: 08/29/2023