map qos-profile cos-to-queue
Use this command to map the cos-to-queue profile to vxlan access port on the local VTEP.
Use the no form of the command to remove the mapping.
Command Syntax
map qos-profile cos-to-queue NAME
no map qos-profile cos-to-queue NAME
Parameters
NAME
Profile name
Default
None
Command Mode
NVO access interface mode
Applicability
This command was introduced before OcNOS version 3.0.
Example
(config)#nvo vxlan access-if port-vlan xe1 10
(config-nvo-acc-if)#map qos-profile cos-to-queue ac_port_ingress
(config-nvo-acc-if)#no map qos-profile cos-to-queue ac_port_ingress
Last modified date: 08/29/2023