map qos-profile queue-color-to-cos
Use this command to map the queue-color-to-cos profile to vxlan access port on the remote VTEP.
Use the no form of the command to remove the mapping.
Command Syntax
map qos-profile queue-color-to-cos NAME
no map qos-profile queue-color-to-cos NAME
Parameters
NAME
Profile name
Default
None
Command Mode
NVO access interface mode
Applicability
This command was introduced before OcNOS version 3.0.
Example
(config)#nvo vxlan access-if port-vlan xe2 10
(config-nvo-acc-if)#map qos-profile queue-color-to-cos ac_profile
(config-nvo-acc-if)#no map qos-profile queue-color-to-cos ac_profile
Last modified date: 08/29/2023