nvo vxlan tunnel qos-map-mode cos-dscp
Use this command to map QoS profile for network side to nvo vxlan tunnel. For outgoing/incoming traffic, you need to provide the direction with the keyword egress/ingress.
Use the no form of this command to delete the mapping.
You must give the
clear nvo vxlan tunnels command to do the network port setting for QoS profile mapped.
Command Syntax
nvo vxlan tunnel qos-map-mode cos-dscp (ingress|egress) NAME
no nvo vxlan tunnel qos-map-mode cos-dscp (ingress|egress)
Parameters
NAME
Profile name
ingress
Ingress direction
egress
Egress direction
Command Mode
Configure mode
Applicability
This command was introduced in OcNOS version 3.0.
Example
(config)#nvo vxlan tunnel qos-map-mode cos-dscp egress nw_profile
(config)#no nvo vxlan tunnel qos-map-mode cos-dscp egress
(config)#nvo vxlan tunnel qos-map-mode cos-dscp ingress nw_profile
(config)#no nvo vxlan tunnel qos-map-mode cos-dscp ingress
Last modified date: 08/29/2023