hardware-profile filter vxlan-mh
Use this command to enable the hardware-profile for VXLAN multi-homing to successfully activate multi-homing in the hardware.
Before enabling EVPN multi-homing (
evpn multi-homed command), give this command.
Before disabling the hardware-profile, disable EVPN multi-homing.
Note: You need to save the configuration and do a reboot after giving this command.
Use the disable form of this command to disable the configured hardware-profile.
Command Syntax
hardware-profile filter vxlan-mh enable
hardware-profile filter vxlan-mh disable
Parameters
None
Default
By default, the VXLAN multi-homing hardware-profile is disabled.
Command Mode
Configure mode
Applicability
This command was introduced in OcNOS version 3.0.
Example
#configure terminal
#(config)#hardware-profile filter vxlan-mh enable
#(config)#hardware-profile filter vxlan-mh disable
#(config)#exit
Last modified date: 08/29/2023