hardware-profile filter vxlan-short-pkt
Use this command to enable/disable the VxLAN short packet forwarding filter group.
When this filter group is enabled, any short packet received less than 36B is sent to the CPU to add extra bytes to make the packet size up to 64B and sent back to access-port.
Use the disable form of this command to disable the configured hardware-profile.
Command Syntax
hardware-profile filter vxlan-short-pkt enable
hardware-profile filter vxlan-short-pkt disable
Parameters
None
Default
By default, the VXLAN short packet hardware-profile is disabled.
Command Mode
Configure mode
Applicability
This command was introduced in OcNOS version 6.3.1.
Example
#configure terminal
#(config)#hardware-profile filter vxlan-short-pkt enable
#(config)#exit
Last modified date: 08/29/2023