show interface irb
Use this command to display the current running configuration of IRB interface.
Command Syntax
show interface irb<1-4094>
Parameters
None
Command Mode
Exec mode
Applicability
This command was introduced before OcNOS version 4.1.
Example
rtr1#show interface irb1
Interface irb1
Hardware is IRB Current HW addr: 0000.0000.ff10
Physical:(Not Applicable) Logical:0000.0000.ff10
Port Mode is Router
Interface index: 700001
Metric 0 mtu 1500
Debounce timer: disable
ARP ageing timeout 1500
<UP,BROADCAST,RUNNING,MULTICAST>
VRF Binding: Associated with vrf1
Label switching is disabled
Administrative Group(s): None
DHCP client is disabled.
Last Flapped: Never
Statistics last cleared: 2019 Mar 14 17:57:06 (00:21:31 ago)
inet 80.80.80.1/24 broadcast 80.80.80.255
inet6 8001::1/64
inet6 fe80::200:ff:fe00:ff10/64
RX
unicast packets 0 multicast packets 0 broadcast packets 0
input packets 0 bytes 0
jumbo packets 0
undersize 0 oversize 0 CRC 0 fragments 0 jabbers 0
input error 0
input with dribble 0 input discard 0
Rx pause 0
TX
unicast packets 0 multicast packets 0 broadcast packets 0
output packets 0 bytes 0
jumbo packets 0
output errors 0 collision 0 deferred 0 late collision 0
output discard 0
Tx pause 0
rtr1#
Last modified date: 08/29/2023