show nvo vxlan vni-name
Use this command to display the vxlan results based on vni-name.
Command Syntax
show nvo vxlan vni-name (WORD)
Parameters
WORD
VXLAN id name
Command Mode
Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#show nvo vxlan vni-name SITEA-PRO
VXLAN Information
=================
Codes: NW - Network Port
AC - Access Port
(u) - Untagged
VNID Vni-name Type Interface ESI Vlan DF-Status Src-addr Dst-addr
____________________________________________________________________________________________________________
1 ---- NW ---- ---------- ---- ------ 10.0.1.1 10.0.6.8
1 ---- NW ---- ---------- ---- ------ 10.0.1.1 10.0.6.9
1 ---- NW ---- ---------- ---- ------ 10.0.1.1 10.0.3.1
1 ---- NW ---- ---------- ---- ------ 10.0.1.1 10.0.1.2
1 ---- NW ---- ---------- ---- ------ 10.0.1.1 10.0.5.1
1 ---- NW ---- ---------- ---- ------ 10.0.1.1 10.0.2.2
1 ---- NW ---- ---------- ---- ------ 10.0.1.1 10.0.2.1
1 SITEA-PRO AC xe7 — Single Hommed port — 2 ------ ---- ----
1 SITEA-PRO AC xe1 — Single Hommed port — 1010 ------ ---- ----
1 SITEA-PRO AC xe1 — Single Hommed port — 100 ------ ---- ----
1 SITEA-PRO AC xe1 — Single Hommed port — 2020 ------ ---- ----
1 SITEA-PRO AC po1 — Single Hommed port — 100 ------ ---- ----
1 SITEA-PRO AC po1 — Single Hommed port — 2 ------ ---- ----
1 SITEA-PRO AC po1 — Single Hommed port — 200 ------ ---- ----
1 SITEA-PRO AC xe8 — Single Hommed port — ---- ------ ---- ----
1 SITEA-PRO AC po2 — Single Hommed port — ---- ------ ---- ----
Total number of entries are 16
Last modified date: 08/29/2023