show running-config nvo vxlan
Use this command to display the current running configuration of VxLANs.
Command Syntax
show running-config nvo vxlan
Parameters
None
Command Mode
Exec mode
Applicability
This command was introduced in a version before OcNOS version 1.3; nvo vxlan id xconnect was introduced in OcNOS version 5.1.
Example
#sh running-config nvo vxlan
!
evpn vxlan multihoming enable
!
evpn esi hold-time 100
!
nvo vxlan enable
!
nvo vxlan irb
!
evpn irb-forwarding anycast-gateway-mac 0000.0000.ff10
!
nvo vxlan vtep-ip-global 2.2.2.2
!
nvo vxlan mac-ageing-time 10
!
nvo vxlan id 10 ingress-replication inner-vid-disabled
vxlan host-reachability-protocol evpn-bgp vrfred
evpn irb1
!
nvo vxlan id 100 xconnect target-vxlan-id 200
vxlan host-reachability-protocol evpn-bgp vrfblue
!
nvo vxlan access-if port-vlan xe13 10
no shutdown
map vnid 10
mac 0000.0000.2222 ip 12.12.12.2
!
nvo vxlan access-if port-vlan xe17 10
no shutdown
map vnid 10
mac 0000.0000.bbbb ip 11.11.11.1
!
nvo vxlan access-if port-vlan xe17 30
no shutdown
map vnid 10
mac 0000.1111.2222
!
nvo vxlan access-if port-vlan xe1 11
description member-port xe1 with vlan 11
no shutdown
map vnid 10
!
nvo vxlan access-if port-vlan xe1 10
no shutdown
map vnid 10
!
nvo vxlan access-if port-vlan xe1 12
no shutdown
map vnid 10
!
nvo vxlan access-if port-vlan xe9 100
no shutdown
map vnid 100
!
Last modified date: 08/29/2023