ipv6 static fall-over-bfd
Use this command to enable BFD support for a specific IPv6 static route.
Use the no option with this command to disable BFD support for a specific IPv6 static route.
Command Syntax
ipv6 static X:X::X:X/M X:X::X:X fall-over-bfd (disable|enable)
no ipv6 static X:X::X:X/M X:X::X:X
ipv6 static vrf NAME X:X::X:X/M X:X::X:X fall-over-bfd (disable|enable)
no ipv6 static vrf NAME X:X::X:X/M X:X::X:X
Parameters
X:X::X:X/M
The IPv6 destination prefix and mask length.
X:X::X:X
The IPv6 gateway address.
NAME
Enable/disable BFD for the IPv6 routes for this user-defined Virtual Routing and Forwarding instance name.
disable
Disable BFD.
enable
Enable BFD.
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3 and updated in OcNOS version 1.3.5.
Examples
#configure terminal
(config)#ipv6 static X:X::X:X/M X:X::X:X fall-over-bfd disable
#configure terminal
(config)#ipv6 static X:X::X:X/M X:X::X:X fall-over-bfd enable
#configure terminal
(config)#ipv6 static vrf vrf1 X:X::X:X/M X:X::X:X fall-over-bfd disable
Last modified date: 10/16/2023