OcNOS-SP : Layer 3 Guide : Bidirectional Forwarding Detection Command Reference : BFD Static Route Commands : ipv6 static bfd
ipv6 static bfd
Use this command to disable BFD support for IPv6 static route(s) configured on an interface.
Use the no option with this command to reset BFD support for IPv6 static route(s) configured on an interface.
Command Syntax
ipv6 static bfd (disable|enable)
no ipv6 static bfd
Parameters
disable
 
Disable BFD
enable
 
Enable BFD
Command Mode
Interface mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#interface eth1
(config-if)#ipv6 static bfd disable
 
Last modified date: 10/16/2023