OcNOS-SP : Layer 3 Guide : Border Gateway Protocol Command Reference : BGP Show Commands : show ip bgp scan
show ip bgp scan
Use this command to display BGP scan status.
Command Syntax
show ip bgp scan
Parameters
None
Command Mode
Privileged Exec mode and Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#show ip bgp scan
BGP VRF: (Default) VRF_ID 0
BGP scan interval is 60 secs
scan remain-time: 3 secs
Current BGP nexthop cache:
BGP connected route:
10.10.10.0/24
10.10.11.0/24
Last modified date: 10/16/2023