hardware filter ipv4-bgp-flowspec

OcNOS-SP : Layer 3 Guide : Border Gateway Protocol Command Reference : BGP Flowspec Commands : hardware filter ipv4-bgp-flowspec

Use this command to enable ipv4 BGP flowspec feature in hardware. Unless it is enabled, the all flowspec routes are not set to hardware, while the all BGP operations are done not related to this command.

Command Syntax

hardware filter ipv4-bgp-flowspec enable

hardware filter ipv4-bgp-flowspec disable

Parameters

None

Command Mode

Configure mode.

Applicability

This command was introduced in OcNOS version 6.3.0.

Examples

(config)#hardware-profile filter ipv4-bgp-flowspec enable

Last modified date: 10/16/2023