vrf
Specify a VRF to configure service policies. This command is executed in the default vrf mode, and enter vrf mode. address-family, local-install and service-policy commands can be executed in the same way (stated in address-family, locall-install, and service-policy type pbr) executed in the default vrf mode.
Command Syntax
vrf VRF_NAME
no vrf VRF_NAME
Parameters
VRF_NAME
A vrf name already created
Command Mode
Flowspec mode.
Applicability
This command was introduced in OcNOS version 6.3.0.
Examples
7017(config)#flowspec
7017(config-flowspec)#vrf VRF1
Last modified date: 10/16/2023