bgp aggregate-nexthop-check
Use this command to set the BGP option to perform aggregation only when next-hop matches the specified IP address.
Use the no parameter with this command to disable this functionality.
Command Syntax
bgp aggregate-nexthop-check
no bgp aggregate-nexthop-check
Parameters
None
Default
By default, bgp aggregate nexthop check is disabled
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#bgp aggregate-nexthop-check
Last modified date: 10/16/2023