OcNOS-SP : Layer 3 Guide : Border Gateway Protocol Command Reference : BGP Commands : bgp rfc1771-path-select
bgp rfc1771-path-select
Use this command to set RFC 1771 compatible path selection.
Use the no parameter with this command to revert this setting.
Command Syntax
bgp rfc1771-path-select
no bgp rfc1771-path-select
Parameters
None
Default
Standard compatible path selection mechanism.
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#bgp rfc1771-path-select
Last modified date: 10/16/2023