OcNOS-SP : Layer 3 Guide : Border Gateway Protocol Command Reference : BGP Commands : exit-address-family
exit-address-family
Use this command to exit Address-Family-vrf, Address-Family-vpnv4 mode.
For information on how to enter the address family mode (IPv4, VPNv4), see address-family.
Command Syntax
exit-address-family
Parameters
None
Default
No default value is specified
Command Mode
Address Family-vrf and Address Family-vpnv4 mode.
Applicability
This command was introduced before OcNOS version 1.3.
Examples
The following examples shows the change in the prompt after using this command.
#configure terminal
(config)#router bgp 100
(config-router)#address-family ipv4 multicast
(config-router-af)#exit-address-family
(config-router)#
 
Last modified date: 10/16/2023