v4-unnumbered-mode
Use this command to configure the unnumbered peer with all the neighbor configs applicable in IPv4 unicast address family.
Use the exit parameter with this command to leave IPv4 BGP unnumbered mode.
Command Syntax
bgp v4-unnumbered-mode
exit-v4-unnumbered-mode
Parameters
None
Applicability
No default value is specified
Command Mode
Address-family IPv4 Unicast Mode
Applicability
This command was introduced in OcNOS-OTN version 4.2.
Examples
#configure terminal
(config)#router bgp 100
(config-router)#address-family ipv4 unicast
(config-router-af)#bgp v4-unnumbered-mode
(config-router-v4-unnum)#
Last modified date: 10/16/2023