ais status
Use this command to enable or disable AIS (Alarm Indication Signal) transmission and set the CFM MD level to transmit in AIS PDUs.
Command Syntax
ais status (enable|disable) level <0-7>
Parameters
enable
Enable AIS
disable
Disable AIS
<0-7>
CFM MD level
Default
disable
Command Mode
Ethernet CFM MA MEP mode
Applicability
This command was introduced in OcNOS version 3.0.
Examples
#configure terminal
(config)#ethernet cfm domain-type character-string domain-name 12345 level 7
(config-ether-cfm)# service ma-type string ma-name testtm
(config-ether-cfm-ma)#vlan 5 bridge 10
(config-ether-cfm-ma)#ethernet cfm mep down mpid 201 active true xe2
(config-ether-cfm-ma-mep)#ais status enable level 7
Last modified date: 10/20/2023