bin-type
Use this command to set the threshold value for a particular bin for a two-way performance monitoring frame delay measurements on a specific MEP.
Use the no form to set threshold value for a particular bin for a two-way performance monitoring frame delay measurements on a specific MEP to its default.
Command Syntax
bin-type frame-delay bin 2 threshold 200
no bin-type frame-delay bin 2 threshold
bin-type inter-frame-delay-variation bin 2 threshold 1000
no bin-type inter-frame-delay-variation bin 2 threshold
Parameters
frame-delay
Frame delay bin type
inter-frame-delay-variation
Inter frame delay variation bin type
<2-10>
Bin number for which the threshold will be changed.
<1- 4294967295>
Threshold value for that bin.
Default
Incremental of 5000 microseconds from bin 2, that is bin 2's threshold will be 5000, bin 3's will be 10000, bin 4 will be 15000, so on and so forth.
Command Mode
Ethernet CFM delay measurement mode
Applicability
This command was introduced in OcNOS version 3.0.
Example
#configure terminal
(config)#ethernet cfm delay-measurement profile-name PROF1
(config-cfm-dm)# bin-type frame-delay bin 2 threshold 200
(config-cfm-dm)# bin-type inter-frame-delay-variation bin 2 threshold 1000
Last modified date: 10/20/2023