cc multicast
Use this command to start or stop multicast continuity checking messages (CCMs) on a MEP.
Command Syntax
cc multicast state (enable|disable)
Parameters
enable
Start sending CCMs
disable
Stop sending CCMs
Command Mode
Ethernet CFM MA MEP mode
Applicability
This command was introduced in OcNOS version 3.0.
Examples
(config)#ethernet cfm domain-type character-string domain-name 12345 level 7
(config-ether-cfm)#service ma-type string ma-name 43982
(config-ether-cfm-ma)#vlan 10 bridge 1
(config-ether-cfm-ma)#ethernet cfm mep down mpid 2331 active true xe2 OcnOS(config-ether-cfm-ma-mep)#cc multicast state enable
Last modified date: 10/20/2023