delay-measurement type proactive
Use this command to configure and start a proactive CFM delay measurement session.
Command Syntax
delay-measurement type proactive profile-name WORD rmep (mac-address MAC|RMEPID) mep MEPID domain DOMAIN_NAME ma MA_NAME
Parameters
WORD
Delay measurement profile name
MAC
Destination MAC address in HHHH.HHHH.HHHH format
RMEPID
Remote MEP identifier <1-8191>
MEPID
Local MEP identifier <1-8191>
DOMAIN_NAME
Enter the name of the domain. Name must be of 5 characters if type is character-string otherwise no_name if domain-type is no-name1
MA_NAME
Enter maintenance association name. If ma-type is character string then maximum length of ma-name is 6 else if it’s integer then maximum is 2-octets.
Command Mode
Exec mode and Privileged Exec mode
Applicability
This command was introduced in OcNOS version 3.0.
Example
#delay-measurement type proactive profile-name 123 rmep 101 mep 123 domain no_name ma 123
Last modified date: 10/20/2023