ethernet cfm mep
Use this command to create a Maintenance End Point (MEP), make it active or inactive and enter Ethernet CFM MA MEP mode.
A MEP created with the active false option remains inactive and CFM functionality is suspended for such a MEP.
Note: For a VPWS instance, only an up MEP can be created; a down MEP cannot be created for VPWS.
Use the no form of this command to delete a MEP.
Command Syntax
ethernet cfm mep (down|up) mpid <1-8191> active (false|true) (IFNAME|vpws VCNAME | evpn <1-16777215>)
no ethernet cfm mpid <1-8191>
Parameters
down
Down MEP
up
Up MEP
active
Administrative state of the MEP
true
Make the MEP active
false
Make the MEP inactive
IFNAME
Interface name
VCNAME
Virtual circuit name
evpn <ID>
EVPN instance ID
Command Mode
Ethernet CFM MA mode
Applicability
This command was introduced in OcNOS version 3.0.
Example
OcNOS(config)#ethernet cfm domain-type character-string domain-name 12345 level 7
OcNOS(config-ether-cfm)#service ma-type string ma-name 43982
OcNOS(config-ether-cfm-ma)#vlan 10 bridge 10
OcNOS(config-ether-cfm-ma)#ethernet cfm mep down mpid 81 active true xe2
Last modified date: 10/20/2023