ethernet cfm test-signal profile-name
Use this command to create a test signal configuration profile associated with a specific MEP.
Use no form of this command to delete a test signal configuration profile.
Command Syntax
ethernet cfm test-signal profile-name WORD
no ethernet cfm test-signal profile-name WORD
Parameters
profile-name
Specify a profile-name
WORD
Specify the test signal profile name with max length of 64 characters
Command Mode
Configure mode
Applicability
This command was introduced in OcNOS version 4.0.
Example
#configure terminal
(config)#ethernet cfm test-signal profile-name 123
(config-cfm-eth-tst)#
(config)#no ethernet cfm test-signal profile-name 123
Last modified date: 10/20/2023