ethernet cfm traceroute cache
Use this command to set the cache size for traceroute output.
Use the no form of this command to set the cache size to its default (100).
Command Syntax
ethernet cfm traceroute cache size <1-4095>
no ethernet cfm traceroute cache size <1-4095>
Parameters
<1-4095>
Number of entries in cache
Default
100 entries
Command Mode
Configure mode
Applicability
This command was introduced in OcNOS version 3.0.
Example
#configure terminal
(config)#ethernet cfm traceroute cache size 1
Last modified date: 10/20/2023