exit-ether-ma-mep-mode
Use this command to exit Ethernet CFM MA MEP mode and go back to Ethernet CFM MA mode.
Command Syntax
exit-ether-ma-mep-mode
Parameters
None
Command Mode
Ethernet CFM MA MEP mode
Applicability
This command was introduced in OcNOS version 3.0.
Examples
OcNOS#configure terminal
OcNOS(config)#ethernet cfm domain-type character-string domain-name 12345 level 7
OcNOS(config-ether-cfm)# service ma-type string ma-name testtm
OcNOS(config-ether-cfm-ma)#vlan 5 bridge 10
OcNOS(config-ether-cfm-ma)#ethernet cfm mep down mpid 201 active true xe2
OcNOS(config-ether-cfm-ma-mep)#exit-ether-ma-mep-mode
exit-ether-ma-mode
Use this command to exit Ethernet CFM MA mode and go back to Ethernet CFM mode.
Command Syntax
exit-ether-ma-mode
Parameters
None
Command Mode
Ethernet CFM MA mode
Applicability
This command was introduced in OcNOS version 3.0.
Examples
OcNOS#configure terminal
OcnOS(config)#ethernet cfm domain-type character-string domain-name 12345 level 7
OcNOS(config-ether-cfm)#service ma-type string ma-name testtm
OcnOS(config-ether-cfm-ma)#exit-ether-ma-mode
frame priority
Use this command to set/reset the PDU frame priority in the Eth-lock.
Command Syntax
frame priority <0-7>
no frame priority
Parameters
<0-7>
Set the PDU priority range.
Command Mode
Ethernet CFM MA MEP LCK mode
Applicability
link-level
Use this command to create a maintenance association for link-level MEPs (level 0) which do not listen on a VLAN.
Command Syntax
link-level (bridge <1-32>|)
Parameters
<1-32>
Bridge id
Command Mode
Ethernet CFM MA mode
Applicability
This command was introduced in OcNOS-SP version 5.1.
Example
OcNOS#configure terminal
OcNOS(config)#ethernet cfm domain-type character-string domain-name 12345 level 0
OcNOS(config-ether-cfm)#service ma-type string ma-name ma1
OcNOS(config-ether-cfm-ma)#link-level
OcNOS(config-ether-cfm-ma)#ethernet cfm mep down mpid 2331 active true xe2
loss-measurement type on-demand
Use this command to schedule an on-demand CFM loss measurement session.
Command Syntax
loss-measurement type on-demand profile-name WORD rmep (mac-address MAC|mep-id MEPID) start-time (immediate|relative HH:MM:SS|absolute HH:MM:SS <1-31> MONTH
<1993-2035>) stop-time (none|relative HH:MM:SS|absolute HH:MM:SS <1-31> MONTH
<1993-2035>) repetition-period <6000-4294967295> mep MEPID domain DOMAIN_NAME
ma MA_NAME
Parameters
WORD
Loss measurement profile name
MAC
Destination MAC address in HHHH.HHHH.HHHH format
MEPID
Remote MEP identifier <1-8191> to which to send the service OAM loss measurement frame
start-time
Measurement session start time
immediate
Start immediately
relative HH:MM:SS
Relative time to start from the current system time
absolute HH:MM:SS <1-31> MONTH <1993-2035>
Scheduled date and time to start; for the month, specify the first three letters
stop-time
Measurement session stop time
none
Never stop
relative HH:MM:SS
Last modified date: 10/20/2023