frame priority
Use this command to set/reset the PDU frame priority in the Eth-lock.
Command Syntax
frame priority <0-7>
no frame priority
Parameters
<0-7>
Set the PDU priority range.
Command Mode
Ethernet CFM MA MEP LCK mode
Applicability
This command was introduced in OcNOS version 4.0.
Example
OcNOS#configure terminal
OcNOS(config)#ethernet cfm domain-type character-string domain-name 12345 level 7
OcNOS(config-ether-cfm)# service ma-type string ma-name ma1
OcNOS(config-ether-cfm-ma)# vlan 25 bridge 10
OcNOS(config-ether-cfm-ma)#ethernet cfm mep down mpid 201 active true xe2
OcNOS(config-ether-cfm-ma-mep)#lck state
OcNOS(config-ether-cfm-ma-mep-lck)#frame priority 3
Last modified date: 10/20/2023