interval
Use this command to set/reset the PDU interval for Eth-lock.
Command Syntax
interval (1s|1m)
no interval
Parameters
1m
Transmit interval one minute.
1s
Transmit interval one second
Command Mode
Ethernet CFM MA MEP LCK mode
Applicability
This command was introduced in OcNOS version 4.0.
Example
OcNOS#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
OcNOS(config)#ethernet cfm domain-type character-string domain-name mdnam level 7
OcNOS(config-ether-cfm)# service ma-type string ma-name testtm
OcNOS(config-ether-cfm-ma)#vlan 5 bridge 10
OcNOS(config-ether-cfm-ma)#ethernet cfm mep down mpid 2 active true xe14 OcNOS(config-ether-cfm-ma-mep)lck state
OcNOS(config-ether-cfm-ma-mep-lck)#interval 1m
OcNOS(config-ether-cfm-ma-mep-lck)#interval 1s
Last modified date: 10/20/2023