OcNOS-SP : Carrier Ethernet Guide : Carrier Ethernet Command Reference : CFM and Y.1731 Commands : intervals-stored
intervals-stored
Use this command to set the number of frame loss measurement intervals to store in the history table.
Use the no form to set the number of measurement intervals to its default (32).
Command Syntax
intervals-stored <2-1000>
no intervals-stored
Parameters
<2-1000>
Time intervals
Default
32
Command Mode
Ethernet CFM loss measurement mode
Applicability
This command was introduced in OcNOS version 3.0.
Example
#configure terminal
(config)#ethernet cfm loss-measurement profile-name PROF1
(config-cfm-lm)#intervals-stored 50
Last modified date: 10/20/2023