lck state
Use this command to enable or disable ETH-Lock PDU transmission.
Use no form to remove the command.
Command Syntax
lck state (unlock|lock)
no lck state
Parameters
unlock
Display ethernet lock PDU transmission
lock
Enable ethernet lock PDU transmission
Command Mode
Ethernet CFM MA MEP mode.
Default lock state is Unlock.
Applicability
This command was introduced in OcNOS version 4.0.
Example
OcNOS#configure terminal
OcNOS(config)#ethernet cfm domain-type character-string domain-name 12345 level 7
OcNOS(config-ether-cfm)# service ma-type string ma-name testtm
OcNOS(config-ether-cfm-ma)#vlan 5 bridge 10
OcNOS(config-ether-cfm-ma)#ethernet cfm mep down mpid 201 active true xe2
OcNOS(config-ether-cfm-ma-mep)#lck state lock
OcNOS(config-ether-cfm-ma-mep-lck)#
Last modified date: 10/20/2023