link-level
Use this command to create a maintenance association for link-level MEPs (level 0) which do not listen on a VLAN.
Command Syntax
link-level (bridge <1-32>|)
Parameters
<1-32>
Bridge id
Command Mode
Ethernet CFM MA mode
Applicability
This command was introduced in OcNOS-SP version 5.1.
Example
OcNOS#configure terminal
OcNOS(config)#ethernet cfm domain-type character-string domain-name 12345 level 0
OcNOS(config-ether-cfm)#service ma-type string ma-name ma1
OcNOS(config-ether-cfm-ma)#link-level
OcNOS(config-ether-cfm-ma)#ethernet cfm mep down mpid 2331 active true xe2
Last modified date: 10/20/2023