measurement-type slm
Use this command to generate Frame Loss Message (SLM/LMM) service OAM PDUs and track replies (SLR/LMR).
The measurement-type CCM is a dual-ended frame loss method in which generated CCM PDUs carry frame loss measurement information (TxFCf, RxFCb and TxFCb).
Use the no form of this command to set the measurement type to its default value (slm).
SLM and LMM cannot be enabled at the same time. All MEPs can use either LMM or SLM for frame loss measurement.
Command Syntax
measurement-type (slm | lmm | ccm)
no measurement-type
Parameters
slm
SLM service PDUs are generated and SLRs is tracked for frame loss measurement.
lmm
LMM service PDUs are generated and LMRs is tracked for frame loss measurement.
ccm
CCM PDUs are used for frame loss measurement which carries frame loss measurement information.
Command Mode
Ethernet CFM loss measurement mode
Applicability
This command was introduced in OcNOS version 3.0.
Example
#configure terminal
(config)#ethernet cfm loss-measurement profile-name PROF1
(config-cfm-lm)#measurement-type slm
Last modified date: 10/20/2023