mep crosscheck
Use this command to configure a remote MEP crosscheck.
Use the no form of this command to delete a crosscheck MEP.
Command Syntax
mep crosscheck mpid MEPID
no mep crosscheck mpid MEPID
Parameters
MEPID
Remote host MEP identifier <1-8191>
Command Mode
Ethernet CFM MA mode
Applicability
This command was introduced in OcNOS version 3.0.
Example
OcNOS#configure terminal
OcNOS(config)#ethernet cfm domain-type character-string domain-name 12345 level 7
OcNOS(config-ether-cfm)# service ma-type string ma-name testtm
OcNOS(config-ether-cfm-ma)#vlan 5 bridge 10
OcNOS(config-ether-cfm-ma)#mep crosscheck mpid 51
Last modified date: 10/20/2023