show ethernet cfm ais reception-status
Use this command to display information about the AIS (Alarm Indication Signal) frames received on a MEP.
Command Syntax
show ethernet cfm ais reception-status mep MEPID domain DOMAIN_NAME(ma-name MA_NAME
Parameters
MEPID
Source host MEP ID <1-8191>
DOMAIN_NAME
Enter the name of the domain. Name must be of 5 characters if type is character-string otherwise no_name if domain-type is no-name1
MA_NAME
Maintenance association name (if type is character string maximum length of ma-name is 6. If type is integer maximum is 2-octets)
<1-32>
Bridge identifier
Command Mode
Exec mode and Privileged Exec mode
Applicability
This command was introduced in OcNOS version 3.0.
Example
#show ethernet cfm ais reception-status mep 100 domain 12345
Last modified date: 10/20/2023