show ethernet cfm csf mep
Use this command to display detail information about Eth-CSF configured on MEP.
Command Syntax
show ethernet cfm csf mep MEPID domain DOMAIN_NAME ma MA_NAME
Parameters
MEPID
Source host MEP ID <1-8191>
DOMAIN_NAME
Enter the name of the domain. Name must be of 5 characters if type is character-string otherwise no_name if domain-type is no-name1
MA_NAME
Maintenance association name (if type is character string maximum length of ma-name is
6. If type is integer maximum is 2-octets)
Command Mode
Exec mode and Privileged Exec mode
Applicability
This command was introduced in OcNOS version 5.2.
Example
#show ethernet cfm csf mep 100 domain 12345 ma 123
MA-Name : 123
MEL: 4
Admin Status : Enable
Interface : xe1
VLAN : 100
Source address : 00:00:11:11:11:11
Wait to Restore timer: 200 sec
State : SIGNAL_DEGRADED
Elapsed time in this state : 00:00:04
Last CSF Received : 2022 Mar 03 17:19:23
CSF Period : 1 sec
CFS Type : LOS
Last modified date: 10/20/2023