show ethernet cfm test-signal domain
Use this command to display ETH-Test receiver or generator statistics.
Command Syntax
show ethernet cfm test-signal domain DOMAIN_NAME ma MA_NAME mep MEPID stats (ctf|gtf)
Parameters
DOMAIN_NAME
Enter the name of the domain. Name must be of 5 characters if type is character-string otherwise no_name if domain-type is no-name1
ma
Specify Maintenance association name
MA_NAME
Enter maintenance association name. If ma-type is character string then maximum length of ma-name is 6 else if it’s integer then maximum is 2-octets.
mep
Specify mep
MEPID
Enter the MEPID ranging from <1-8191>
stats
Display the statistics
ctf
Display ETH Test Frame Collector statistics
gtf
Display ETH Test Frame Generator statistics
Command Mode
Exec mode
Applicability
This command was introduced in OcNOS version 4.0.
Example
#show ethernet cfm test-signal domain 12345 ma 43982 mep 21 stats gtf
TST Session status : In-Progress
Elapsed Time(sec) : 36
MD : 12345
MA : 43982
MEP : 21
Peer MAC Address : 6cb9.c557.42d0
RMEP ID : 12
Start Time : 2019 Mar 01 10:23:11
Transmitted Packet Count : 2854713
Last modified date: 10/20/2023